How to Make Bunny Treat Bags (free Pattern)

Easter is the perfect time to add a handmade touch to your gifts, and these bunny treat bags are simple, fast, and beginner-friendly. Using a “trace and stitch” method, you can make multiple bags in just a couple of hours—even if you’re new to sewing.

Materials Needed (Per Bunny Bag)

Prepare the following:

• 4 fabric squares (5” x 5”)
  • 1 for bunny ears
  • 1 for bunny face/front
  • 1 for the bag back
  • 1 for ear lining
• 16 inches of ribbon (⅛”–¼” wide)
• Fabric marking tool (pencil or heat-erasable pen)
• Matching thread
• Sewing machine
• Iron
• Free bunny ear and face templates (printed and cut)

Tip: Pre-cut multiple 5” squares if you plan to batch-make several bags.

Step 1: Trace the Templates

1. Cut out the paper templates for the bunny ears and face.
2. Take two fabric squares:
   • On one square, trace two bunny ears.
   • On another square, trace the bunny face shape.
3. Leave at least ¼ inch space around each traced shape.

Do not cut the fabric yet—you will sew first, then trim.

Step 2: Create the Ribbon Casing

This step prepares the opening for your drawstring.

1. Take the front (face) square and the back square.
2. On the top edge of each:
   • Fold down ¼ inch, press with the iron.
   • Fold again ½ inch, press again.
3. Open these folds back up (this is important for sewing later).

Add the Buttonhole (Front Square Only):

4. Draw a vertical line (about ⅜ inch long) in the center, just below the fold line.
5. Sew a buttonhole over this line.
6. Carefully cut open the buttonhole.

Step 3: Pin and Sew

1. Layer your squares right sides together:
   • Ear square + ear lining square
   • Front (with buttonhole) + back square
2. Make sure the casing folds are unfolded before sewing.
3. Pin everything securely.

Stitching:

4. Sew directly on the traced lines:
   • Around the bunny ears
   • Around the bag shape
5. Start sewing from the top edge for best alignment.

Step 4: Trim and Turn the Ears

1. Trim excess fabric around stitched shapes, leaving about ¼ inch seam allowance.
2. At the tip of each ear, trim off the point (without cutting stitches).
3. Turn the ears right side out.
4. Use a blunt tool (like a chopstick) to gently push out the curves.
5. Press flat with an iron.

Step 5: Attach Ears & Sew Casing

1. Keep the bag inside out.
2. Refold and press the casing folds back into place.
3. Position the ears on the back panel, tucked under the casing:
   • The side facing you now will be the back of the ears later.
4. Pin the ears in place.

Stitch the casing:

5. Sew along the folded edge of the casing:
   • Start and stop at the side seams
   • Catch the ears in your stitching
6. Backstitch at both ends to secure.

Tip: If your sewing machine has a small free arm, use it. Otherwise, carefully turn the bag right side out for easier stitching.

Step 6: Finish the Bag

1. Turn the bag right side out.
2. Use a safety pin or bodkin to thread the 16” ribbon through the casing via the buttonhole.
3. Pull both ends and tie a knot or bow.

Final Result

You now have a cute bunny treat bag—perfect for:

• Easter candy
• Small gifts
• Party favors

Extra Tips

• One charm pack (about 20–21 squares) can make 5 bunny bags.
• Mix and match fabrics for unique designs.
• Add embellishments like embroidery, buttons, or fabric paint for personality.

Enjoy making your handmade bunny bags—and have a fun, creative Easter! 🐣